Pool-Care.net                                             866-385-4930

Add algicide weekly or at least every 2 weeks to prevent algae growth. 


A good quality algicide (concentrates sold in quart sizes) backs up the chlorine or sanitizer in case it is exhausted due to heavy bather load or heavy rain.

Key 5 - Water Chemistry
you don't have to be a certified chemist to operate your home swimming pool!  Our programs are pool owner & consumer friendly. 

Our pool care programs, no matter which one you choose was designed with your safety & enjoyment in mind.


As long as you can "follow the program, " pool water care is easy & shouldn't take much more than 5 - 10 minutes (including clean up) each week to accomplish this task.

Although similar, Water Chemistry & Water Testing go hand in hand & you can't do one without the other.


Last but not least it's water chemistry.  Pool water chemistry IS easy - just 4 simple steps:

Shock the pool weekly or at a minimum every 2 weeks (biguanides shock every 3 to 4 weeks). 


Shocking oxidizes unfilterable wastes & breaks up chloramines that lead to cloudy water, algae, smelly pools & red eyes.

The 5 Keys to Pool Care ... Key 5 - Water Chemistry





Maintain a constant level of Sanitizer in the Pool - What does that mean? 


It means to constantly keep a good, solid level or chlorine, bromine, biguanide or other sanitizer level in the pool water at all times. 

Pool owners who don't regularly shock their pool (they think they're saving money) always end up with bad cloudy water & algae problems and they wonder why they use so much chlorine.  Shocking puts the sparkle back in the pool water.  Shocking breaks up the waste that attaches onto the sanitizer & prevents it from doing its job. 


Shocking is a good thing to do before a party to prevent icky water from developing while the party is going on  AND after to eliminate all of the "stuff" that got left behind.  In bromine pools, the shock recharges the bromine to make it last longer.

Use the appropriate type of shock for your pool.  BioGuard® Burn Out 3® or Smart Shock® for chlorine & bromine pools. Soft Swim® "C" for biguanide (Soft Swim® or Baquacil®) pools.  Pools that use ionizers such as Nature2® should use the chlorine shocks mentioned above or BioGuard® Easy Shock & Swim®.  Shock the pool at start-up or opening (even if the chlorine or bromine level is good) to oxidize & neutralize contaminants that have hung in over the winter.  After that follow a regular schedule.


Learn more about shocking here.

Chlorine 1.0 - 2.0 ppm (FAC or Free Avalable Chlorine - the chlorine that is actually working)
Bromine 2.5 - 4.5 ppm
Biguanide 30 - 50 ppm(Soft Swim, Baquacil, etc)
PristineBlue® 0.5 - 1.0 ppm

When maintained at those levels, bacteria & algae are kept under control. The water feels & smells clean.  Higher levels is typically unnecessary unless recommended by your Pool Professional in certain circumstances such as pool parties.  Slow-dissolving Chlorine such as BioGuard® Silkguard Tabs®, Silkguard Sticks® & Smart Silkguard Sticks® can be applied to the pool through the skimmer or an automatic chlorinator (not Smart Silkguard Sticks - skimmer application only). 

We don't recommend floaters because they can be tossed out of the pool or get stuck causing a concentration in one area of the pool.  Bromine must always be dispensed using a brominator.  Biguanides such as BioGuard® Soft Swim® & Baquacil  or non-chloirne (but chlorine compatible) Pristine Blue® are liquids that are typically added only once every 1 to 2 weeks.

Good water balance & good water chemisty go hand in hand. Proper levels of pH , Total Alkalinity & Calcium Hardness are critical to not only how your sanitizers work, they are integral in maintaining the pool surface & equipment; not to mention your skin, hair & bather comfort.


As an option that will save you from a variety of pool care problems (algae, cloudy water, water balancing), consider using a borate or boric acid based product such as BioGuard® Optimizer Plus®.  Optimizer Plus®, when used properly, suppresses algae growth, helps allow the sanitizer to do a better job at killing bacteria, acts an additional buffer for the pH & Total Alkalinity making water balance simpler.  Optimizer Plus® is added at the start of the season & is topped up as needed.  Optimizer Plus® is great to use in ANY pool, with any sanitizing system and is one of the 3 Foundations of Good Pool Water Care.

Another option to consider is using natural enzymes in the water. Natural enzymes (as opposed to man-made or manufactured enzymes - read more here) "eat up" all kinds of organic waste that may or may not be filterable or oxidizable (shocking won't remove these wastes). Using NaturCare® on a weekly basis takes the stress from the chlorine or sanitizer, reduces water or scum line (where many pool problems - including cloudy water - begin), keeps the filter cleaner, reduces much of the food (including phosphates) source that algae loves.  In the long run, you save lots of time and money.

Pristine Blue users click here for more information & usage tips.

Remember to follow the other 5 Keys to Pool Care.  They're just as important.
 

The 5 Keys typically take about ONE hour or less to accomplish each week.  Yes, that's it!  Just 1 hour.  Now you can enjoy your pool more & actually work less.  In the long run, you'll also spend less time & money.


Click here to learn more about the 5 Pillars & 3 Foundations of Good Pool Water Care.

Par Inc of Conn, Par Pool & Spa © ALL RIGHTS RESERVED

Powered by ParPools.com

Good quality algicides such as BioGuard® Back Up 2® or Algae All 60® are also good surfactants.  Surfactants are chemicals that like to cling to or hang around surfaces.  They help to make the water "wetter".  Because they like surfaces, they stay where algae likes to grow.

Not using an algaecide on a regular basis is asking for trouble somewhere down the line. You could have a beautiful clear, blue pool one day, then it rains & it has been transformed into a green monster - and you have a pool party in 3 hours!  Regular shocking AND algaecide would have prevented that sorry mess.

Last but not least it's water chemistry.  Pool water chemistry IS easy - just 4 simple steps (4 of the 5 Pillars of Pool Care):

1. Maintain a constant level of sanitizer in the pool.
Slow dissolving chlorine sticks or tablets; proper level of biguanide (Soft Swim); bromine; salt level.
 
2. Shock the pool weekly or at a minimum every 2 weeks (biguanides shock every 3 to 4 weeks). 
Shocking oxidizes unfilterable wastes & breaks up chloramines that lead to cloudy water, algae, smelly pools & red eyes.
 
3. Add algicide weekly or at least every 2 weeks to prevent algae growth. 
A good quality algicide (concentrates sold in quart sizes) backs up the chlorine or sanitizer in case it is exhausted due to heavy bather load or heavy rain.
 
4. Maintain good water balance. 
Without good water balance, the sanitizer doesn't work properly or efficiently.  The water can become cloudy (high pH) or aggressive (low pH - water is often times really clear).  You'll also protect your friends & family who use your pool.

Maintain good water balance. 


Without good water balance, the sanitizer doesn't work properly or efficiently.  The water can become cloudy (high pH) or aggressive (low pH - water is often times really clear).  You'll also protect your friends & family who use your pool.  Learn more about Good Water Balance with Key 4 - Water Testing.